Для входа в режим конфигурирования нужно набрать команду _cmdline-mode on, и ввести заводской пароль 512900.
ADVERTISEMENT
_cmdline-mode on All commands can be displayed and executed. Continue? [Y/N]y Please input password:****** Warning: Now you enter an all-command mode for developer's testing, some commands may affect operation by wrong use, please carefully use it with our engineer's direction.
Список доступных команд:
[HP]?
System view commands:
aaa Specify AAA configuration
acl Specify acl configuration information
archive Specify archive settings
arp Specify ARP configuration information
bootrom-update bootrom update
burst-mode Specify burst mode
cfd Connectivity fault detection (IEEE 802.1ag)
clock Specify the system clock
cluster Specify cluster configuration information
command-alias Specify command alias
command-privilege Specify the command level
configuration Specify configuration settings
copyright-info Copyright information configuration
cut Cut connection
delete Delete function
dhcp DHCP configuration subcommands
dhcp-snooping DHCP Snooping
display Display current system information
dldp Specify configuration information of DLDP
dns Specify domain name system
domain Add domain or modify domain attributes
dot1x Specify 802.1X configuration information
execute Batch Command
file Specify file system configuration information
fips Federal Information Processing Standards (FIPS)
140-2 module
ftp Specify FTP configuration information
garp Generic Attribute Registration Protocol
gratuitous-arp-learning Gratuitous Arp learning function
gratuitous-arp-sending Sending gratuitous-arp packet when receiving
different sub-network arp packet function
gvrp GARP VLAN Registration Protocol
habp Specify HABP configuration information
header Specify the login banner
hotkey Specify hotkey configuration information
hwtacacs Specify HWTACACS server
igmp-snooping IGMP snooping
ike Specify IKE(Internet Key Exchange) configuration
information
info-center Specify information center configuration information
interface Specify the interface configuration view
ip Specify IP configurations for the system
ipsec Specify IPSec(IP Security) configuration information
ipv6 Enable IPv6 functionality
job Schedule a system task
jumboframe Jumboframe command
lacp Configure LACP Protocol
link-aggregation Specify link aggregation group configuration
information
lldp Link Layer Discovery Protocol(802.1ab)
local-user Specify local user configuration information
logfile Specify log file configuration
loopback-detection Detect if loopback exists
mac-address Configure MAC address
mac-authentication Specify Mac-auth configuration information
mac-vlan Specify the MAC VLAN configuration information
mirroring-group Specify mirroring-group
mld-snooping Enter mld-snooping view
monitor-link Configure monitor link
multicast-vlan Multicast VLAN
ndp Neighbor discovery protocol
nqa Specify NQA (Network Quality Analyzer) configuration
information
ntdp Specify NTDP configuration information
ntp-service Specify NTP(Network Time Protocol) configuration
information
oam OAM protocol
password-control Specify password control
password-recovery Password recovery function
patch Specify patch configuration information
ping Ping function
pki Specify PKI module configuration information
port-group Port group
port-security Specify port-security configuration information
portal Portal protocol
public-key Specify public-key module configuration information
qos Command of QoS(Quality of Service)
quit Exit from current command view
radius Specify RADIUS configuration information
return Exit to User View
rmon Specify RMON
save Save current configuration
sftp Specify SFTP service attribute
shutdown-interval ShutDown Detection
slave HA command
smart-link Configure smart link
snmp-agent Specify SNMP(Simple Network Management Protocol)
configuration information
ssh Specify SSH (secure shell) configuration information
ssl Specify SSL (Secure Socket Layer) configuration
information
stack Switch stack system
storm-constrain Port storm-constrain
stp Spanning tree protocol
super Specify super configuration information
sysname Specify the host name
system-failure System failure handling method
system-guard System guard function
tcp Specify TCP(Transmission Control Protocol)
configuration information
telnet Specify TELNET configuration information
temperature-limit Set temperature limit
tftp Specify TFTP configuration information
tftp-server TFTP Server
time-range Specify time-range configuration information
tracert Trace route function
traffic Specify traffic configuration information
undo Cancel current setting
user-group Specify user group configuration information
user-interface Configure the user terminal interface
user-profile User profile
vlan Configure VLAN
voice Specify voice VLAN
web Web configuration
Как подписать порт?
Набираем в коммандной строке system-view:
system-view System View: return to User View with Ctrl+Z. [HP]interface GigabitEthernet 1/0/20 [HP-GigabitEthernet1/0/20]description User 20 [HP-GigabitEthernet1/0/20]quit
Сохраняем конфиг
[HP]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/startup.cfg] (To leave the existing filename unchanged, press the enter key): Validating file. Please wait.... Saved the current configuration to mainboard device successfully. Configuration is saved to device successfully. [HP]
